Official UK procurement notice
Supply of One New Medium Sized Low Emission Panel Van
Authority: Hythe and Dibden Parish Council (Local council)
What is being bought
Published requirement descriptionSUPPLY OF ONE NEW MEDIUM SIZED LOW EMISSION PANEL VAN
Lot 1: Plug in Hybrid Electric Vehicle, PHEV
Lot 2: Battery Electric Vehicle, BEV
Estimated contract value: approximately £45,000 excluding VAT
Closing date: 12 noon, Friday 23rd October 2026
Hythe and Dibden Parish Council invites tenders from suitably qualified vehicle suppliers for the supply, first registration and delivery of one new medium sized low emission panel van.
The Council is seeking a vehicle broadly equivalent in size and operational capability to a Ford Transit Custom L1 H1. The reference to the Ford Transit Custom is provided solely as an indication of the approximate size and operational characteristics required. Equivalent vehicles from other manufacturers will be considered.
The procurement is divided into two Lots:
Lot 1: Plug in Hybrid Electric Vehicle, PHEV
Lot 2: Battery Electric Vehicle, BEV
Suppliers may tender for either Lot or both Lots. The Council intends to purchase one vehicle only and will award either Lot 1 or Lot 2.
Required specification
The principal requirements include:
Medium sized panel van
New and previously unregistered
Minimum three seats including driver
Overall length approximately 5,050 mm
Overall height approximately 2,000 mm
Loadspace length approximately 2,600 mm or greater
Loadspace volume approximately 5.5 m³ or greater
Minimum payload 900 kg
Side and rear loading access
White
Moulded load floor liner or equivalent durable protection
Ply lining or equivalent durable load compartment protection
Tyre repair kit, spare wheel or suitable manufacturer equivalent
PHEV vehicles must have a manufacturer's published electric only range of at least 30 miles.
BEV vehicles must be capable of AC charging and DC rapid charging.
Full mandatory and evaluation requirements are contained in the tender pack.
Operational and charging requirements
The Council's operational requirements mean that full overnight charging cannot be routinely relied upon.
The vehicle is expected to spend an average of approximately two hours per working day at the Council's workshop, where electric vehicle charging facilities are available. The Council is prepared to consider an upgrade or replacement of the existing charging facility where reasonably necessary for the vehicle offered.
Tenderers must provide details of the charging requirements for their proposed vehicle and identify and price any recommended charging equipment or upgrade.
Price and evaluation
The estimated contract value is approximately £45,000 excluding VAT.
The tendered price must include all costs associated with supply and first registration, including the first registration fee and Vehicle Excise Duty where applicable. VAT must be identified separately.
Tenders will be evaluated on the basis of:
Five Year Whole Life Cost: 45%
Operational Suitability and Specification: 30%
Delivery Commitment: 15%
Warranty, Servicing and Aftersales Support: 10%
Full details of the evaluation methodology are contained in the tender pack.
Part exchange
The Council owns a Nissan NV300, registration HG21 LBU, which it will consider in part exchange.
Suppliers may arrange to inspect the vehicle before submitting a part exchange valuation.
The Council reserves the right not to accept a part exchange offer and to dispose of the existing vehicle separately.
Delivery and timetable
The Council requires the new vehicle to be supplied, registered and available for possession no later than 31st January 2027.
Tenders will be considered by the Council on Thursday 5th November 2026, with notification and contract award intended during the week commencing Monday 9th November 2026, subject to completion of the procurement process.
Tender pack and enquiries
For the tender pack and further information, contact:
Hythe and Dibden Parish Council
The Grove
25 St John's Street
Hythe
Southampton
SO45 6BZ
Website: www.hytheanddibden.gov.uk ↗
Telephone: 02380 841411
For technical enquiries or to arrange an appointment to inspect the current vehicle, contact:
Andrew Sheppard
Email: andrew.sheppard@hytheanddibden.gov.uk
Telephone: 02380 841411
Submission
Completed tenders must be received by The Clerk to the Council no later than:
12 noon on Friday 23rd October 2026 and must be submitted in accordance with the submission instructions contained in the tender pack.
Hythe and Dibden Parish Council does not bind itself to accept the lowest priced tender or any tender and reserves the right not to proceed with the procurement.
CPV: Vans
The lotProcurement structure
single lot · value publishedLot #1Published value£45,000
What it takes to wini
How this buyer will score bids.
The evaluation criteria and weights exactly as published on the notice, grouped by family (price, quality, social value and so on).
Evaluation split and conditions of participation as published; the tender pack may add morei
How this buyer will score bids.
The evaluation criteria and weights exactly as published on the notice, grouped by family (price, quality, social value and so on).
Published sub-criteria (4)
- Operational Suitability and Specification: 30%
- Delivery Commitment: 15%
- Warranty, Servicing and Aftersales Support: 10%
- Five Year Whole Life Cost: 45%
Published award criteria (4)
- Five Year Whole Life Cost: Five year evaluated whole life cost based on an evaluation period of five years and 45,000 miles. The assessment will include the vehicle acquisition cost and other reasonably quantifiable applicable costs, including scheduled servicing, energy costs, necessary charging equipment or upgrades and any accepted part exchange allowance. Full calculation methodology and evaluation assumptions are set out in the Invitation to Tender.
- Operational Suitability and Specification: Assessment of the vehicle's suitability for the Council's operational requirements. This comprises Load Carrying Capability 8%, Dimensions and Manoeuvrability 6%, Powertrain, Range and Charging Suitability 8%, and Equipment and Practical Specification 8%. Full requirements and scoring methodology are set out in the Invitation to Tender.
- Delivery Commitment: Assessment of the proposed delivery date and the certainty and robustness of the supplier's delivery commitment. The vehicle must be supplied, first registered and available for possession no later than 31 January 2027.
- Warranty, Servicing and Aftersales Support: Assessment of the manufacturer's vehicle and battery warranties where applicable, service intervals, servicing arrangements, roadside assistance, availability of replacement parts and practical aftersales support.
- Price carries 45 of 100 points: a 10% discount moves about 4.5 points. Quality carries 55 of 100: the paper moves it further than the discount.
Price arithmetic assumes straight proportional scoring; the tender pack may use another formula.
Procedure terms & legal framework
From the official record- Procedure method
- Below threshold - open competition
- Legal basis
- UKPGA · 2023/54 Procurement Act 2023
- Procurement category
- Goods
- Notice status
- Closed
- Procurement threshold
- Below threshold
- Regulatory regime
- Standard
- Commercial structure
- Stand-alone contract (no framework)
- Competition type
- Competitive procedure
- GPA / WTO covered
- Unspecified in notice
- Recurring procurement
- Unspecified in notice
- First published
- 1 Oct 2026, 11:21 BST
- Last source update
- 1 Oct 2026, 11:21 BST
- Authority reference
HDPC100126- FTS notice number
2026/S 000-092745- Latest notice
- Tender notice (UK4)
- Classification (CPV)
- Delivery area
- Official registry OCID
ocds-h6vhtk-077e6eFind a Tender
How it was run
Official notice- Submission deadline
- 23 Oct 2026, 12:00 BST
- Electronic submission
- Not allowed
- INSTRUCTIONS FOR TENDERING
I. Confidentiality
Tenderers shall treat the details and contents of this tender document as private and confidential and shall not disclose them except where reasonably necessary to prepare and submit the tender.
Tenderers should note that the Council is subject to statutory requirements concerning procurement transparency, access to information and disclosure. The Council cannot therefore guarantee that information supplied by tenderers will remain confidential where disclosure is required by law.
II. Contract award
Tenders must be received by 12 noon on Friday 23rd October 2026.
Tenders will be presented to the Council on Thursday 5th November 2026.
Subject to the Council's decision and completion of the procurement process, the Council intends to notify the successful tenderer and award the contract during the week commencing Monday 9th November 2026.
III. Acceptance and costs
Hythe and Dibden Parish Council does not bind itself to accept the lowest priced tender or any tender.
The Council reserves the right not to proceed with the procurement.
No payment will be made for costs or expenses incurred in preparing or submitting a tender.
IV. Prices
Prices entered in the tender shall remain fixed and valid for this procurement and, if accepted, in accordance with the resulting contract.
The tender must include all costs necessary to supply the vehicle, including first registration fee and Vehicle Excise Duty where applicable.
VAT and any part exchange allowance must be shown separately.
V. Submission
Completed tenders must be sent to:
The Clerk to the Council
Hythe and Dibden Parish Council
The Grove
25 St John's Street
Hythe
Southampton
SO45 6BZ
in a sealed envelope or package clearly marked:
TENDER: SUPPLY OF NEW MEDIUM SIZED LOW EMISSION VAN
The outer envelope or package must not identify the tenderer.
Tenders must arrive no later than:
12 noon on Friday 23rd October 2026.
VI. Consideration
Tenders will be presented to the Council on Thursday 5 November 2026 and considered in accordance with the Council's Standing Orders, Financial Regulations, the stated evaluation criteria and applicable procurement legislation.
VII. Timescale
All tenders must meet the timescale and delivery requirements in this document.
The vehicle must be supplied, registered and available for possession no later than:
31st January 2027.
The anticipated delivery date must be stated.
VIII. Information to be returned
All information requested in the Tenderer's Details, Vehicle Offer and Compliance Schedule, Pricing Schedule, Summary Sheet and other return schedules must be completed and returned.
The Summary Sheet must be signed by an authorised person.
Failure to provide required information or comply with submission requirements may result in rejection.
Timeline
1 Oct 2026 → 31 Jan 2027 · 3 dates- Tender notice published26 days ago1 Oct 2026, 11:21 BST
- Submission deadline4 days ago23 Oct 2026, 12:00 BST
- Today28 Oct 2026
- Contract startsin 94 days31 Jan 2027
Notice history
1 event · 1 release on Find a Tender- Tender notice published1 Oct 2026, 11:21 BSTUK4
Contracting authority & participating public bodies
Official documents & specifications (3)
Official links; attachments are not copiedTender pack and attachments
Notices published for this procedure
- Tender notice Tender notice on Find a Tender